How Many Solar Panels Do You Need for Your Water Pump?

How Many Solar Panels Do You Need for Your Water Pump?

If you have spare solar panels lying around your farm or property, you might be asking: Can I use these existing panels to drive new solar water pumps? And exactly how many do I need to connect?

Whether you are pumping bore water for stock drinking supply or running paddock irrigation under the sunny Queensland skies, getting the right match between your panels and pump specs is key to keeping your water flowing reliably and avoiding equipment damag


1. Core Principles of Panel Sizing Calculations

The bottom line is straightforward: different pump models require a different pump configuration. When working out your setup, always follow these two core rules during your panel sizing calculations:

⚡ Power Rule

Total panel power ≥ pump power × 1.3 (leaving a 30% power overhead compensates for real-world weather conditions and system efficiency losses).

🔋 Voltage Rule

The total open-circuit voltage of the series panel array must stay below the maximum limit of the MPPT pump controller.


2. Real Customer Case Study: Queensland Farm Setup

Let's look at a real example from a Queensland customer. The farm has a 4-inch bore casing, standard water source, a total head requirement of 120 metres, a flow rate of 3m³/h, and the owner wants to reuse their 20 existing panels with the following specs:

Parameter Specification
Brand / Model NoahEnergy NH-195M72
Max Power (Pmax) 195W
Open Circuit Voltage (Voc) 45.80V
Working Voltage (Vmp) 36.70V
Working Current (Imp) 5.32A

  Here is how we helped select the ideal pump.

🔧 DIFFUL Recommendation:

We focused on five key factors: 120 metres total head, 4-inch casing, 3m³/h flow rate, standard water quality, and reusing the 20 × 195W panels.

The customer's existing solar array has a total capacity of:

20 × 195 W = 3900 W

Capacity-wise, this array provides ample input headroom for a 3kW-class unit. However, because the actual total head reaches 120 metres, standard low-head high-flow pumps won't work, so we needed to focus on actual flow performance under high head conditions.

Ultimately, we recommended the:

3DPC3.8-180-110-1500

It fully satisfies all requirements for head, casing diameter, flow rate, and water quality.

📐 Solar Panel Calculation

For this 1500W DIFFUL pump, the minimum target total array power is:

1500 × 1.3 = 1950W

Required number of panels:

1950 W ÷ 195W ≈ 10

🔆 Connecting just 10 panels brings the system into the ideal input range for the controller, guaranteeing smooth, full-capacity operation even on overcast days.


3. Need Help Calculating Your System Setup?

Matching the right solar array layout to your pump rating and controller input protects your equipment investment while securing a steady daily water supply.

💡 If you have spare panels on hand and aren't sure how to build your system, simply send your bore casing size, head, required flow rate, and water quality details to the DIFFUL team!

We will work out the exact array design tailored specifically for your property.

0 comments

Leave a comment