How to Select an 1100W 110V DC Solar Water Pump in Australia?

How to Select an 1100W 110V DC Solar Water Pump  in Australia?

Do you need to extract water from a deep well in a rural area without access to the mains power grid? Choosing the wrong pump or an improper solar panel configuration can lead to poor system performance and unnecessary installation costs.

For farmers and owners of off-grid properties in Australia, an 1100W 110V DC solar deep-well pump is a highly practical solution. Powered directly by solar panels via a built-in MPPT controller, the system requires neither a connection to the mains grid nor an additional inverter.

In this guide, we will use the requirements of a client in Phillip, Canberra, to demonstrate how to determine the appropriate solar panel configuration for a solar water pump.

🔎 What are the client's requirements?

A client in Phillip, Canberra, contacted us seeking a reliable solar water pump for a deep well on their property. Their specific requirements were as follows:

Pump rated power: 1100W

Rated voltage: 110V DC

Well depth: 50 meters

Solar panel configuration: 4 x 400W solar panels connected in series

Solar array Voc (Open-Circuit Voltage): Approximately 161–169V DC

The client’s goal was to establish an independent water supply system that operates entirely on solar energy, without any reliance on the mains power grid.

💧 Recommended pump: DIFFUL 3DPC3.8-123-110-1100

Based on the client's requirements, we recommended the DIFFUL 3DPC3.8-123-110-1100 solar water pump.

This 110V DC solar pumping system features an MPPT controller, allowing the solar array to power the pump directly without the need for an additional inverter. For rural properties or off-grid applications, this solution effectively simplifies system configuration and reduces initial investment costs.

☀️ How to Configure Solar Panels

Selecting the right solar panel configuration is just as important as choosing the water pump itself. For this system, DIFFUL provides the following recommendations:

Total solar panel power (minimum requirement): 1100W × 1.3 = 1430W

Total open-circuit voltage (Voc) of the solar array (maximum limit): 450V

The following example demonstrates how a configuration of four solar panels meets these requirements:

1. Calculate the total solar panel power

Using four solar panels, each with a rated power of 400W:

4 × 400W = 1600W

✅ This configuration meets the 1430W minimum power requirement set by DIFFUL. You may also use panels with a higher individual power rating, provided the total power meets the requirement.

2. Verify the total open-circuit voltage (Voc)

Connect the four solar panels in series. In this configuration, the total Voc is 161–169V.

161–169V < 450V

✅ Safe; will not damage the controller.

Conclusion: A configuration of four 400W solar panels connected in series provides a total rated solar power of 1600W, with an open-circuit voltage of 161–169V—a range that fully complies with the pump’s maximum voltage limit.

🌾 Practical Solar Water Pumping Solutions for Off-Grid Living in Australia

Whether you are managing a rural property near Canberra, operating a farm in a remote part of New South Wales, or living in an off-grid home elsewhere in Australia, correctly matching your water pump with the appropriate solar panels is essential for ensuring a reliable groundwater supply—especially during the dry season. The DIFFUL 3DPC3.8-123-110-1100 model is a reliable solar-powered groundwater extraction solution that operates independently, without the need for a grid connection.

View DIFFUL 3DPC3.8-123-110-1100 Solar Water Pump

Not sure how many solar panels you need for your deep-well pump? Please contact the DIFFUL team; we will help you determine the optimal pump power, solar panel capacity, and system voltage based on your specific requirements.

0 comments

Leave a comment